木工加工棚的搭设在我们的日常生活中还是相当的常见的，在建筑上面也是经常会看到的，还要注意以下相关的内容，

It is quite common to set up woodworking sheds in our daily life, and we often see them on buildings. We should also pay attention to the following related contents,

木工加工棚采用国标钢材制作，双层防砸设计，结构牢固稳定。它是全拼装式，方便运输基本安装。它颜色鲜明，美观大方，它的产品尺寸 、颜色等均可按施工现场的实际要求定制。

The woodworking shed is made of national standard steel, with double-layer anti smashing design, and the structure is firm and stable. It is fully assembled, convenient for transportation and basic installation. Its color is bright and beautiful. Its product size and color can be customized according to the actual requirements of the construction site.

木工加工棚安装说明：构件用螺栓连接，瓦面用自攻钉连接。对于大多数人来说，传统手工木艺是一个噪音、空间、可操作性的公约数，当然，换个角度看，传统手作的慢反有了充分的时间去触碰、去思考，不满足于一个想法的实现，把木制作变成一个成品的过程，从而慢慢加工成木工加工棚。

Installation instructions of woodworking shed: the components are connected with bolts, and the tile surface is connected with self tapping screws. For most people, traditional hand-made woodwork is a common divisor of noise, space and operability. Of course, from another perspective, traditional hand-made woodwork has enough time to touch and think. It is not satisfied with the realization of an idea. It turns woodwork into a finished process, and then it is slowly processed into a woodworking shed.

木工加工棚的搭设：

Erection of woodworking shed:

1. 木工加工棚搭设具体尺寸根据现场实际情况确定。

1. The specific size of the woodworking shed shall be determined according to the actual situation on site.

2. 搭设在塔吊回转半径和建筑物周边的加工车间须设置双层硬质防护。

2. The processing workshop set up around the slewing radius of the tower crane and the building must be equipped with double-layer hard protection.

3. 加工车间地面需硬化，宜选用砼地面。

3. The ground of the processing workshop needs to be hardened, and the concrete ground should be selected.

4. 加工车间顶部应张挂警示标识和宣传用语的 横幅，横幅宽度宜为1m。

4. A banner with safety warning signs and safety propaganda words should be hung on the top of the processing workshop, and the width of the banner should be 1m.

5. 工具式钢筋加工棚需在醒目处挂操作规程图牌，图牌 的尺寸为：宽×高=2000mm×1000mm。

5. The tool type reinforcement processing shed needs to hang the operation specification drawing board at the eye-catching place, and the size of the drawing board is: width × Height =2000mm × 1000mm。

6. 各种型材及构配件规格为参考值，具体规格应根据当 地风荷载、雪荷载进行核算。

6. The specifications of various profiles and components and fittings are reference values, and the specific specifications should be calculated according to the local wind load and snow load.

7. 南方地区，如遇台风应采取防风措施，可设置缆风绳。

7. In the south, in case of typhoon, windproof measures should be taken, and wind ropes can be set.

关于木工加工棚的搭设知识讲解就到这里了，您的需求如果是该产品的购买或者其他方面，都可以关注我们网站//www.hongdaxinwuliu.com来联系我们，为您提供帮助！

That's all for the knowledge about the construction of woodworking shed. If your demand is the purchase of this product or other aspects, you can pay attention to our website //www.hongdaxinwuliu.com Come and contact us to help you!