钢筋加工棚主要用于路途、修建、桥梁工地施工上，一听名字就知道是用于钢筋加工零件所建的一个防护棚，能够用来遮雨避阳，使工人在气候条件不允许的情况下进行作业生产。

The steel bar processing shed is mainly used for road, construction, and bridge construction sites. The name suggests that it is a protective shed built for steel bar processing parts, which can be used to shelter from rain and sunlight, allowing workers to carry out work and production in weather conditions that do not allow.

钢筋加工棚常用的尺度有两种，一种是宽4000*长6000*高3500㎜，另一种是宽6000*长9000*高3500mm，钢筋加工棚的结构分为立柱、横梁、双层龙骨，氟碳涂层彩钢板，防砸木板5大类，这些大类拼装出一整套的钢筋加工棚，连接方法。运用镀锌紧固件，按照图纸量好场所尺度后先垂立立柱，立柱设备结束后在立柱前端设备横梁，等设备好横梁后依据图纸量好龙骨尺度散布设备，这一步完成后直接设备防砸模板，终究一步便是氟碳涂层彩钢板的设备。

There are two commonly used dimensions for steel bar processing sheds. One is 4000 mm wide * 6000 mm long * 3500mm high, and the other is 6000 mm wide * 9000 mm long * 3500mm high. The structure of the steel bar processing shed is divided into five categories: columns, crossbeams, double-layer keels, fluorocarbon coated color steel plates, and anti impact wooden boards. These categories assemble a complete set of steel bar processing sheds and their connection methods. Using galvanized fasteners, after measuring the site scale according to the drawing, the column is first erected. After the column equipment is completed, the crossbeam is installed at the front end of the column. After the crossbeam is installed, the keel scale is measured according to the drawing to spread the equipment. After this step is completed, the anti smashing template is directly installed, and the final step is to use fluorocarbon coated color steel plate equipment.

看似设备麻烦，实则设备简略，运送便利，是工地钢筋防护棚的挑选，钢筋加工棚和钢管防护棚的比照：钢筋加工棚符合出产标准化要求，定型组装和设备，配色，结构，可达到标准化要求。

Although the equipment may seem complicated, in reality, it is simple and easy to transport. It is the selection of steel reinforcement protection sheds for construction sites. The comparison between steel reinforcement processing sheds and steel pipe protection sheds: the steel reinforcement processing shed meets the standardized requirements for safe production, with standardized assembly and equipment, color matching, and structural safety, which can meet the standardized requirements.

钢筋加工棚选用规范不锈钢板材制做，两层防坠构造，结实用，规范化设计方案，全组装式，快组装，拆装简易，运送。伴随着市场经济体制的发展趋势，修建工程施工公司遭遇着强烈的市场需求。怎样打造出平稳，美观大方的文明行为施工工地是各个施工工地需要应对的难点，施工工地钢筋加工棚是修建工程施工平稳管理方法为要害的一环。

The steel processing shed is made of standard stainless steel plates, with a two-layer anti fall structure, practical structure, standardized design scheme, fully assembled, fast assembly, easy disassembly and transportation. With the development trend of the market economy system, construction companies are facing strong market demand. How to create a stable, aesthetically pleasing and civilized construction site is a difficult point that each construction site needs to deal with. The steel processing shed on the construction site is a crucial part of the smooth management method for construction projects.

钢筋加工棚应怎样设置？

How to set up a steel processing shed?

1、各种防护棚应该有单的模板支撑体系，固定不动平稳。制止用竹子搭设，且不行悬挑脚手架在外面架子上；

1. Various protective sheds should have a single template support system that is fixed and stable. Prohibit the use of bamboo for construction, and do not hang scaffolding on external shelves;

2、收支房屋修建行为主体通道口应搭设防护棚。棚宽阔于道闸，两边各长出1m，净宽规格应合乎高空作业平稳防护区域。掉落半径（R）各自为：当下跌物高度为2~5m时，R为3m；当下跌物高度为5~15m时，R为4m；当下跌物高度为15~30m时，R为5m；当下跌物高度超过30m时，R为6m；

2. The main body of the income and expenditure housing construction behavior should set up protective sheds at the safety passage entrance. The shed is wider than the gate, with a length of 1m on each side. The net width specification should comply with the safe and stable protection area for high-altitude operations. The falling radii (R) are: when the height of the falling object is 2-5m, R is 3m; When the height of the falling object is 5-15m, R is 4m; When the height of the falling object is 15-30m, R is 5m; When the height of the falling object exceeds 30m, R is 6m;

3、木匠加工场所、修建钢筋加工场所等上边有可能下跌物品或处在起重设备调杆旋转区域以内，应搭设两层防护棚；

3. Two layers of protective sheds should be erected on carpenter processing sites, steel reinforcement processing sites, and other areas where objects may fall or are within the rotating area of lifting equipment adjustment rods;

4、非通道口应设定禁行标志，制止收支。

4. Non safe passage entrances should be marked with no traffic signs to prevent income and expenditure.

5、平稳防护棚应选用两层保护措施，当选用脚板口腔上皮细胞，层间隔600mm，铺装方位应相互垂直；

5. A stable protective shed should be equipped with two layers of protective measures. When using foot board oral epithelial cells, the layer spacing should be 600mm, and the paving direction should be perpendicular to each other;

6、内场（外）路面边框线与房屋修建（或外脚手架）边缘间距各自低于掉落半径的，应搭设平稳通道。

6. If the distance between the boundary line of the inner (outer) road surface and the edge of the building construction (or outer scaffolding) is lower than the falling radius, a stable and safe passage should be erected.