我们要是做围挡的话，经常是需要将工地施工围挡要做成弯曲弧形来适应安装环境的，因为这样做事更加的有美感而且也是更加的漂亮一些的。但是很多时候我们却不能这么做，因为工地施工围挡的里面是加了钢材的，那么很少有钢材是可以做到弯曲的，那么这个就是他的一个限制性的条件了。

If we do enclosure, we often need to make the construction enclosure of the construction site into a curved arc to adapt to the installation environment, because it is more beautiful and more beautiful. But many times we can't do this, because steel is added to the construction enclosure of the construction site, so few steel can be bent, so this is a limiting condition.

并且我们工地施工围挡厂家说工地施工围挡还是有很多的优点的，他是可以没有油漆和维修的，不管是新的和旧的，都免去您的保养疲劳和麻烦，是比较的低的综合成本。工地施工围挡不需要除锈和油漆，只需要定期用水和洗涤剂清洗就可以了。工地施工围挡具有足够的强度和抗冲击性能，使工地施工围挡兼具钢的强度和美观。

Moreover, our site construction fence manufacturer said that there are many advantages for the site construction fence. It can be free of paint and maintenance. Whether it is new or old, it will save you fatigue and trouble in maintenance, which is relatively low comprehensive cost. The construction enclosure on the construction site does not need rust removal and painting, but only needs to be cleaned regularly with water and detergent. The construction enclosure at the construction site has sufficient strength and impact resistance, so that the construction enclosure at the construction site has both the strength and beauty of steel.

那么遇到需要弯曲的地方怎么办呢?我们可以采用一些连接的部件进行相互的链接，使得我们的工地施工围挡能够任意方向的摆放，这样在一定程度上也是能够与安装环境相契合的，虽不能做到十分的好看，但是在安装上注意使用，也能够起到很好的效果。并且这样一来他的优点也是保留下来了，而且围挡的使用的寿命也是很不错的。

So what should we do when we meet the place that needs bending? We can use some connecting parts to link with each other, so that our construction fence can be placed in any direction, which is also compatible with the installation environment to a certain extent. Although it can not be very beautiful, it can also play a very good role in the installation. In this way, its advantages are also preserved, and the service life of the enclosure is also very good.

围挡采用非砖墙围蔽的，鼓励采用可再生循环利用的预制板新型材料及钢架可装配式材料进行围蔽，围蔽高度不得低于2.5米，围挡挡板之间的连接缝隙不能大于两厘米左右。围板柱顶应设置造型，每隔一根立柱须在柱顶安装圆型灯具，电压应低于36V，并采取措施保证用电，各单元四边须加固压边。

If the enclosure adopts non-brick wall enclosure, it is encouraged to use renewable recycled prefabricated slab new materials and steel frame assemblable materials for enclosure. The enclosure height shall not be less than 2.5 meters, and the connection gap between the enclosure baffles shall not be more than two centimeters. Shape shall be set at the top of the coaming column, and circular energy-saving lamps shall be installed at the top of every column, with the voltage lower than 36V, and measures shall be taken to ensure the safety of electricity use, and the four sides of each unit shall be reinforced and pressed.

在围挡施工的时候，施工完毕，立柱和板块要保证在同一水平线上，前后的误差不能大于5厘米，每一个板块和立柱之间的地面不能出现松动的情况，围挡立柱和围挡挡板之间要保证安装特别牢固，不会出现松动，围挡的高度一定要保持一致，而且在焊接的地方一定要处理的特别干净。关注我们//www.hongdaxinwuliu.com，带您了解更多事项！

During the construction of the enclosure, after the construction, the column and the plate shall be on the same horizontal line, and the error between the front and back shall not be greater than 5 cm. The ground between each plate and the column shall not be loose. The installation between the enclosure column and the enclosure baffle shall be particularly firm, and there shall be no looseness. The height of the enclosure must be consistent, and the welding place must be treated particularly clean. Follow us //www.hongdaxinwuliu.com , take you to learn more!