木工加工棚一般需根据施工组织计划，还需考虑部分钢筋原材料、加工后钢筋的周转及堆放。下面来讲讲木工加工棚的6点基本使用常识。

Generally, the woodworking shed shall be constructed according to the construction organization plan, and the turnover and stacking of some raw materials and processed steel bars shall also be considered. Now let's talk about 6 basic common sense of woodworking shed.

1.木工棚分为敞开式和封闭式，净空高度不低于2900mm。

1. The woodworking shed is divided into open type and closed type, and the clearance height is not less than 2900mm.

2.塔吊回转半径内和建筑物周边的加工棚应设置双层硬质防护,上下层间距不小于600mm。

2. The processing shed within the slewing radius of the tower crane and around the building shall be provided with double-layer hard protection, and the space between the upper and lower layers shall not be less than 600mm.

3.加工车间地面需硬化,立柱与地面连接牢固。

3. The ground of the processing workshop needs to be hardened, and the column is firmly connected with the ground.

4.加工棚应配置灭火器、验收牌、警示牌等图牌。

4. The processing shed shall be equipped with fire extinguishers, acceptance boards, warning boards and other drawing boards.

5.敞开式木工棚立柱、桁架主梁均采用150×150mm方钢，桁架连杆均用50×150mm方钢,立柱基础浇筑700×700×700mm混凝土,预埋300×300×12mm钢板。

5. The column and truss main beam of the open woodworking shed are 150 × 150mm square steel, 50 for truss connecting rod × 150mm square steel, 700 column foundation pouring × seven hundred × 700mm concrete, embedded 300 × three hundred × 12mm steel plate.

6.各种型材及构配件规格为参考值，具体规格应根据当地风荷载、雪荷载进行核算，编制专项方案。如遇台风应采取防风措施，可设置缆风绳。

6. The specifications of various profiles and components and fittings are reference values. The specific specifications shall be calculated according to the local wind load and snow load, and a special scheme shall be prepared. In case of typhoon, windproof measures shall be taken, and wind rope can be set.

关于木工加工棚的6点基本使用常识问题的相关内容便是这样了，您对此有什么不理解的地方欢迎来我们网站//www.hongdaxinwuliu.com咨询了解！

Here are the six basic common sense questions about woodworking shed. If you have any questions, please come to our website //www.hongdaxinwuliu.com Ask about it!