现在的木工加工棚是每个建筑施工的地方的必备品，在施工现场保护工人的，但是大家了解木工加工棚制作工艺么？厂家给大家具体介绍一下。

Now the woodworking shed is a necessary item in every building construction area, and it protects the safety of workers at the construction site. But do you know the woodworking shed production process? The manufacturer gave you a detailed introduction.

1、现场钢筋制作、木工加工、空压机、小型机械机具等应设置木工加工棚。

1. Woodworking shed shall be set for on-site reinforcement fabrication, woodworking, air compressor, small machinery and tools, etc.

2、棚体高度与宽度应满足作业需求。棚立柱采用埋地或螺栓锚地等方式固定牢固。

2. The height and width of the shed shall meet the operation requirements. The shed column shall be firmly fixed by means of burial or bolt anchorage.

3、棚体应用龙骨加强或四周缆风拉结等方式，保证在台风等灾害性气候下有足够的强度、使用。

3. The shed shall be strengthened by keel or tied by cable wind around to ensure sufficient strength and safe use in typhoon and other disastrous climates.

4、棚体顶面悬挂警示标语，棚内悬挂操作规程等标牌。

4. Safety warning slogans shall be hung on the roof of the shed, and signs such as safety operation procedures shall be hung inside the shed.

5、棚内应设置专用牌板，用以挂放特种作业人员作业证复印件、技术交底等资料;应设置专用箱柜，用以存放作业人员的劳动防护、作业工器具等物品。

5. Special signboards shall be set in the shed to hang copies of work permits, technical disclosure and other materials of special operators; Special boxes and cabinets shall be set up to store the labor protection, operation tools and instruments of operators.

6、棚体处于高空坠物半径内或处于起重机臂杆回转范围之内时，棚顶采用双层5cm厚木板铺顶防护，上下两层间隔0.6m。

6. When the shed is within the radius of falling objects or within the slewing range of the crane boom, the roof of the shed shall be covered with double-layer 5cm thick wooden boards, with an interval of 0.6m between the upper and lower layers.

7、强噪设备木工加工棚应采取封闭、加装隔音板等措施进行降噪，强光设备应设置防光污染措施。

7. The woodworking shed for strong noise equipment shall be closed and equipped with sound insulation boards to reduce noise, and the strong light equipment shall be provided with light pollution prevention measures.

8、地铁施工一般场地狭小，困难时可根据情况采用双层棚、推拉式棚、或结合使用。搭建应进行专项设计，保证棚体有足够强度。

8. Generally, the subway construction site is narrow, and double decked shed, push-pull shed, or combination can be used according to the situation when it is difficult. Special design shall be carried out for erection to ensure adequate strength of the shed.

虽然木工加工棚在施工场所一定程度可以保护，但是还是需要工资人员自身多多注意，希望我们的介绍能对大家有所帮助，有需要木工加工棚的企业可以联系我们//www.hongdaxinwuliu.com!

Although the woodworking shed can protect the safety of the construction site to a certain extent, the wage staff should pay more attention to it. I hope our introduction can help you. Enterprises that need woodworking sheds can contact us //www.hongdaxinwuliu.com !