木工加工棚是我们工地施工现场常见到的物品，起到的作用非常大，主要是保护周围人员以及现场施工顺利，下面来讲讲一般常规下的产品详情内容吧。

Woodworking shed is a common item on our construction site, which plays a very important role, mainly to protect the safety of surrounding personnel and the smooth construction on site. Now let's talk about the details of products under general conventions.

1.木工加工棚采用国标钢材制作。

1. The woodworking shed is made of national standard steel.

2.高压焊接，双层防砸结构。

2. High pressure welding, double-layer anti smashing structure.

3.标准化设计，全拼装式，组装，拆卸简单，方便运输。

3. Standardized design, full assembly, simple assembly and disassembly, convenient transportation.

4.地面需要硬化，立柱基础浇筑700*700*700mm混凝土，预埋300*300*12mm钢板。

4. The ground needs to be hardened. The column foundation is poured with 700*700*700mm concrete and embedded with 300*300*12mm steel plates.

5.可根据客户尺寸、材料的实际需求定制。

5. It can be customized according to the actual needs of customers' size and materials.

木工加工棚一般需根据施工计划，安置钢筋对焊机、切断机、弯曲机、调直机......等设备的数量及加工流水线；另还需考虑部分钢筋原材料、加工后钢筋的周转及堆放；现场施工场地、用电等条件来确定；故钢筋加工棚一般跨度在12~18m,，长度尽可能大于30m。

Generally, the woodworking shed needs to install steel bar butt welding machine, cutting machine, bending machine, straightening machine according to the construction plan The number of equipment and processing lines; In addition, it is also necessary to consider the turnover and stacking of some reinforcement raw materials and processed reinforcement; On site construction site, electricity and other conditions; Therefore, the reinforcement processing shed generally has a span of 12~18m and a length of more than 30m as far as possible.

木工加工棚的搭设还要注意一下几点：

The following points should be paid attention to in the erection of woodworking shed:

1.工具式木工加工棚搭设具体尺寸根据现场实际情况确定。

1. The specific size of the tool type woodworking shed shall be determined according to the actual situation on site.

2.搭设在塔吊回转半径和建筑物周边的加工车间设置双层硬质防护。

2. The processing workshop set up around the slewing radius of the tower crane and the building is provided with double-layer hard protection.

3.加工车间地面需硬化，宜选用砼地面。

3. The ground of the processing workshop needs to be hardened, and the concrete ground should be selected.

4.加工车间顶部应张挂警示标识和宣传用语的横幅，横幅宽度宜为1m。

4. Warning signs and banners of propaganda words should be hung on the top of the processing workshop, and the width of the banner should be 1m.

5.工具式钢筋加工棚需在醒目处挂操作规程图牌，图牌的尺寸为：宽×高=2000mm×1000mm。

5. The tool type reinforcement processing shed needs to hang the operation specification drawing board at the eye-catching place, and the size of the drawing board is: width × Height =2000mm × 1000mm。

6.各种型材及构配件规格为参考值，具体规格应根据当地风荷载、雪荷载进行核算。

6. The specifications of various profiles and components and fittings are reference values, and the specific specifications should be calculated according to the local wind load and snow load.

7.南方地区，如遇台风应采取防风措施，可设置缆风绳。

7. In the south, in case of typhoon, windproof measures should be taken, and wind ropes can be set.

以上就是今天为大家介绍的关于问题以及注意事项的全部内容，希望对大家能有所帮助，想要了解更多内容可以电话联系我们或者关注我们的网站//www.hongdaxinwuliu.com，我们的工作人员会及时与您取得联系。

The above is all about the problems and precautions introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website //www.hongdaxinwuliu.com , our staff will contact you in time.