工地围挡施工方法以及设计思想内容介绍
工地围挡的施工方法
Construction method of site enclosure
施工围挡的主要作用是将建筑场地与外界环境隔离而使建筑场地成为相对封闭的空间,以保证施工的顺利进行,避免行人误入,发生事故。
The main function of the construction enclosure is to isolate the construction site from the external environment and make the construction site a relatively closed space, so as to ensure the smooth progress of the construction and avoid the accidental entry of pedestrians and safety accidents.
施工围挡的结构包括选择各种砌体材料砌筑围护结构,选择各种成形的板材以形成一个整体。保护体通常采用机械膨胀螺栓和化学螺纹检测,将柱底部的钢基板固定在下部底座中心,均匀分布,砖石或混凝土浇筑的下部底座是由土木工程建造的。
The construction enclosure structure includes the selection of various masonry materials to build the enclosure structure, and the selection of various formed plates to form a whole. The protective body is usually detected by mechanical expansion bolts and chemical threads. The steel base plate at the bottom of the column is fixed in the center of the lower base and evenly distributed. The lower base of masonry or concrete pouring is constructed by civil engineering.
另外,为保证在护栏装置完成后,确保上端和下端的平直度在直线区间内,要采用上下两条平行线对基准进行调整。柱与钢衬里之间的间距必须与规划尺度一致,以确保预组装的半成品可以与它连接。
In addition, in order to ensure that the straightness of the upper and lower ends is within the straight section after the completion of the guardrail device, the upper and lower parallel lines shall be used to adjust the benchmark. The spacing between the column and the steel lining must be consistent with the planning scale to ensure that the pre assembled semi-finished products can be connected with it.
要注意的是,在现场施工中,只有护栏和立柱的横向衬砌需要连接和固定。所以在离开工厂之前,安装和连接护栏的横向和刚性钢衬里一定要各种轴承点的加固配件。
It should be noted that during site construction, only the horizontal lining of guardrail and column needs to be connected and fixed. Therefore, before leaving the factory, the installation and connection of the horizontal and rigid steel lining of the guardrail must be reinforced with various bearing points.
工地围挡的设计思想
Design idea of site enclosure
模块化设计:对施工围挡进行标准化定义,立柱,上下挡,接口,施工围挡厂家包边等实现标准化生产,形成模块化设计。产品模块化既能够很好的产品生产标准,制作周期和生产成本之间的矛盾,又可为产品的快速更新换代,进步产品的质量,便利修理,现场快速施工等,为增强产品的竞争力提供必要条件。
Modular design: carry out standardized definition for construction fence, and realize standardized production for column, upper and lower fence, interface, construction fence manufacturer edge wrapping, etc. to form modular design. Product modularization can not only solve the contradiction between product production standards, production cycle and production cost, but also provide necessary conditions for the rapid renewal of products, the improvement of product quality, the convenience of repair, the rapid construction on site, etc., so as to enhance the competitiveness of products.
循环设计:围挡可实现二次利用,对于损坏的部份可快速更换,工地围挡哪家好拆除的围挡移植到其它工程项目中继续使用,能够降低施工单位的二次投入成本,减少企业支出,以达到零部件及资源多次使用。
Circular design: the enclosure can be reused, and the damaged parts can be quickly replaced. The enclosure that is easy to be removed can be transplanted to other engineering projects for continuous use, which can reduce the secondary investment cost of the construction unit and reduce the enterprise expenditure, so as to achieve multiple use of parts and resources.
设计:围挡采用PVC材料或彩钢板做面层,两种材料均可再生利用,减少压力,保护环境。
Environmental protection design: the enclosure adopts PVC material or color steel plate as the surface layer. Both materials can be recycled to reduce environmental pressure and protect the environment.
围挡的施工方法以及设计思想内容介绍就到这里了,想了解更多就来我们网站www.hongdaxinwuliu.com咨询吧!
That's all for the construction method and design idea of enclosure. If you want to learn more, please visit our website at www.jnpfjc Com consulting!
- 上一篇:钢筋加工棚的钢管架设式过程
- 下一篇:临边护栏施工前各方面要预先准备