现有技术中的钢筋加工棚一般为钢管架设式，相应的过程如下内容：

The reinforcement processing shed in the prior art is generally steel pipe erection type, and the corresponding process is as follows:

将多根钢管在现场紧固架设，形成加工棚的整体钢结构。钢结构包括四个角处的四个钢管立柱和四个钢管。钢管梁，每根钢管梁的两端分别与两根钢管柱的顶端固定，上述四根钢管柱和四根钢管梁构成整体钢结构的钢架，钢结构还包括多根连接加强钢管，每根连接加强钢管的两端分别固定在构成钢骨架的两根钢管之间。

Several steel pipes are fastened and erected on site to form an integral steel structure of the processing shed. The steel structure includes four steel pipe columns and four steel pipes at four corners. The two ends of each steel pipe beam are respectively fixed with the top of two steel pipe columns. The above four steel pipe columns and four steel pipe beams form the steel frame of the overall steel structure. The steel structure also includes a plurality of connecting reinforcing steel pipes, and the two ends of each connecting reinforcing steel pipe are respectively fixed between the two steel pipes forming the steel frame.

钢管架设的钢结构完成后，验证钢结构的强度是否符合设计要求，然后在钢结构顶部铺设一层彩钢板。然后，将多根垂直钢管焊接在钢结构的四根钢管梁上，然后将平行于钢管梁的水平钢筋和同排的垂直钢管通过紧固件紧固固定。钢管和四根水平钢筋构成防坠落防护栏杆。然后将标语和横幅挂在栏杆上，整个钢筋加工棚的施工就完成了。

After the steel structure erected with steel pipes is completed, verify whether the strength of the steel structure meets the design requirements, and then lay a layer of color steel plate on the top of the steel structure. Then, a plurality of vertical steel pipes are welded on the four steel pipe beams of the steel structure, and then the horizontal reinforcement parallel to the steel pipe beam and the vertical steel pipes in the same row are fastened and fixed through fasteners. Steel pipes and four horizontal steel bars form fall protection railings. The construction is finished and the safety banner is hung on the railing.

工程考虑到施工工期、施工场地和要求，故在选择方案时，应充分考虑以下几点：

Considering the construction period, construction site and safety requirements of the project, the following points shall be fully considered when selecting the scheme:

1、架体的结构设计，力求做到结构要可靠，造价经济合理。

1. The structural design of the frame shall strive to ensure that the structure shall be safe and reliable and the cost shall be economical and reasonable.

2、在规定的条件下和规定的使用期限内，能够充分满足预期的性和耐久性。

2. It can fully meet the expected safety and durability under the specified conditions and within the specified service life.

3、选用材料时，力求做到常见通用、可周转利用，便于保养维修。

3. When selecting materials, strive to be common, reusable and convenient for maintenance.

4、结构选型时，力求做到受力明确，构造措施到位，搭拆方便，便于检查验收。

4. When selecting the structure, strive to make the stress clear, the structural measures in place, and the erection and disassembly convenient for inspection and acceptance.

5、综合以上几点，钢筋加工棚的搭设，要符合文明标化工地的有关标准。

5. Based on the above points, the erection of reinforcement processing shed shall meet the relevant standards of civilized and standardized construction site.

此外钢筋加工棚具有多次拆装、重复使用、牢固、整齐、美观、拆装方便等优点，而且使用有不同的尺寸，在不同的工程中需要选择不同的尺寸，所以要根据实际情况来定下，详细的内容可以关注网站www.hongdaxinwuliu.com咨询了解到！

In addition, the reinforcement processing shed has the advantages of multiple disassembly, reuse, firmness, tidiness, beauty, convenient disassembly and other advantages, and it has different sizes. Different sizes need to be selected in different projects, so it should be determined according to the actual situation. For details, please refer to the website www.jnpfjc Com consulting learned!