围挡怎么在生产中注意质量!
围挡的搭设应规整紧密结实漂亮。
The setting up of fences shall be regular, tight, solid and beautiful.
围挡施工过程中,面板不能呈现锈迹,要涂有保护材料。
During enclosure construction, the panel shall not show rust and shall be coated with protective materials.
围挡施工结束,彩钢板与钢管之间钢管与钢管之间有必要联接结实,不得有松动现象。
After the enclosure construction, it is necessary to connect the color steel plate and steel pipe firmly without looseness.
围挡施工结束,板与板之间联接平顺,直线段要在一条直线上;板与板之间不能留有显着较大缝隙。
After the enclosure construction, the connection between plates shall be smooth, and the straight line section shall be in a straight line; No significant gap shall be left between plates.
围挡施工的架体焊接有必要结实,确保承受本市对大的风压和风雪荷载。
The frame welding of enclosure construction must be strong to ensure that it can bear the heavy wind pressure and wind and snow load of the city.
⑵文明施工
(2) safe and civilized construction
对一切出场的工人都要进行三级教育。
Three level safety education shall be carried out for all workers.
合理选择制作装置场地,削减噪音对周边环境污染。
Reasonably select the manufacturing plant site to reduce the noise pollution to the surrounding environment.
作业时,配备好防护用品及灭火设施。
During operation, safety protection articles and fire extinguishing facilities shall be equipped.
⑶防火防风办法
(3) fire and wind prevention measures
暂时围挡建立需分类分组堆积,按防火要求设定距离。消防器材布局合理标准。
For the establishment of temporary enclosure, it needs to be stacked in categories and groups, and the distance shall be set according to the fire protection requirements. Fire fighting equipment layout is reasonable and standard.
用电线路电器设备有必要由具有相应资质电工一致装置,并配置漏电保护器等防护器材,一致选用三相五线制,即TN-S标准。
It is necessary for the electrical equipment of power lines to be installed by electricians with corresponding qualifications, equipped with leakage protectors and other protective equipment, and uniformly select the three-phase five wire system, i.e. TN-S standard.
建立健全用电动火审批手续。易燃易爆物品办理“四定(定人定责任定岗位定奖罚)”。
Establish and improve the approval procedures for electric safety hot work. "Four fixed" (fixed person, responsibility, position, reward and punishment) shall be handled for inflammables and explosives.
彩钢板围挡抗风力等级为8级,为了更有用的反抗风,需对其进行加固。
The wind resistance grade of color steel plate enclosure is grade 8. In order to more effectively resist the wind, it needs to be reinforced.
柱与柱之间选用钢筋结实焊接,使围挡之间联接更紧密,全体受力,避免倒伏。
The reinforcement shall be firmly welded between the columns to make the connection between the fences more compact, all stressed and avoid lodging.
围挡内侧增设40*40角铁,柱与柱间选用钢筋电焊联接。
A 40 * 40 angle iron is added inside the enclosure, and the column is connected with the column by electric welding.
压槽面板下方堆积沙袋,压住底边,避免底边被风吹裂。
Sandbags are stacked under the pressure groove panel to press the bottom edge to avoid the bottom edge being cracked by the wind.
每3块面板为一个距离空地,距离空地距离为300mm,以削减受风受力面积,增加透风率。
Every three panels are an open space, 300mm away from the open space, so as to reduce the wind bearing area and increase the air permeability.
以上的精彩内容来自:济南蓬发建材有限公司济南围挡的介绍及分享,更多内容请继续关注我们://www.hongdaxinwuliu.com
The above wonderful content comes from the introduction and sharing of Jinan enclosure of Jinan pengfa building materials Co., Ltd. please continue to pay attention to us for more content: //www.hongdaxinwuliu.com